Ships all five phases of the deep-profile overhaul together. Runs now
carry a profile (quick/deep/soak); every profile walks the same
11-stage order — Inventory → Firmware → SpecValidate → SMART →
CPUStress → Storage → Network → Burn → GPU → PSU → Reporting —
with only per-stage durations and concurrency scaled.
Phase 1: profiles.ProfileRegistry loaded from vetting.yaml; runs.profile
column + CreateWithProfile; threshold table + evaluator seeded per-run
from the shared vetting.thresholds block; breach flips result at
/sensor + /result.
Phase 2: upgraded CPUStress (stress-ng --cpu-method=all --verify +
EDAC/MCE poll), Storage (fio --verify=md5 + SMART start/end delta),
Network (sustained iperf + /proc/net/dev deltas) with per-profile
knobs from Deps.
Phase 3: Burn super-stage with goroutine fan-out for CPU + memory +
fio + iperf, PSU rails sampled across the Burn window, SensorMux
(2 s flush, 500-sample cap) to absorb backpressure.
Phase 4: Firmware stage + firmware_snapshots table; probes dmidecode
(BIOS), ipmitool (BMC), ethtool -i (NIC), nvme (sysfs + id-ctrl),
lspci (HBA), /proc/cpuinfo (microcode). spec.DiffFirmware folds into
SpecValidate with pin-by-identifier and fan-out-across-component
matching; mismatches park the run in FailedHolding.
Phase 5: profile radio on the host start form, profile chip on the
run header, Firmware section in the HTML report, coverage artifact
uploaded from CI, agent/tests/fakes/ scaffold with Deps.LookPath
seam + stress_ng and dmidecode example fakes.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Previously the orchestrator ran a full DHCP server on a dedicated
br-vetting bridge (10.77.0.0/24), which required a hypervisor-level
bridge + physical cabling onto that bridge for every repaired host.
Real-world bite: the LXC's br-vetting had no L2 path to the target
host's PXE NIC, so DHCPDISCOVERs never reached eth1 and PXE silently
timed out.
dnsmasq's proxy-DHCP mode is the idiomatic answer: it coexists with
the LAN's existing DHCP server (UniFi, etc.), never assigns an IP
itself, and only supplements the PXE options. No dedicated bridge,
no VLAN, no cabling changes \u2014 dnsmasq binds to the LAN interface
and layers option 66/67 + the PXE BINL on top of the real DHCP
exchange. The MAC allowlist still gates replies, so random LAN
clients booting from network get nothing.
Template switches dhcp-range=<start,end,lease> to
dhcp-range=<cidr>,proxy and replaces dhcp-boot= for first-boot ROM
clients with pxe-service= directives (the correct proxy-mode
chainload form). Validation drops the dhcp_range regex for a
net.ParseCIDR check on pxe.subnet. Config, production/example yaml,
and pxe-setup.sh swap --dhcp-range for --subnet.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
vetting-agent gains a `host` subcommand that runs as a systemd service
installed by the quick-register one-liner, POSTing every 30s to
/api/v1/hosts/{mac}/heartbeat so the dashboard tile shows "online" or
"Nm ago" without waiting on WoL. Ships dormant client code for the
Phase 2 reboot_for_vetting command so the server can flip it on later
without a binary redeploy.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Can't log in from a fresh LXC deploy, and the service is LAN-only by
design. Rip out the whole bcrypt-password / signed-cookie session
layer: internal/auth, login templates, gen-admin-password binary +
Makefile targets, auth config block, login/logout routes and the
RequireSession middleware wrap. Agent bearer-token auth on
/api/v1/runs/{id}/* is untouched.
Operators who want a password can front the service with a reverse
proxy — noted in README and docs/operations.md.
Service was crashing on every boot because vetting.example.yaml uses
./var/... relative paths that resolve to / under ProtectSystem=strict.
Ship a separate vetting.production.yaml with absolute /var/lib/vetting
+ /var/log/vetting paths that match the unit's ReadWritePaths, and
have install.sh copy that one. Also move StartLimit* keys into [Unit]
to silence the 'Unknown key' warning on modern systemd.
josh