pxe.Supervisor.Reload() was defined but never wired up. After a host
was registered in the UI or via the quick-register JSON endpoint, the
dnsmasq conf still held only the hosts that existed at orchestrator
startup. The new MAC wasn't tagged `known`, so when the host PXE'd,
dnsmasq logged "PXE(eth0) <mac> proxy-ignored" and the boot timed out
back to the BIOS.
Add an optional PXEReloader interface to api.UI, wire it from main
when pxe is enabled, and call u.reloadPXE() after successful Create
and Delete. Logs-and-continues on failure — host registration itself
has already committed.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Previously the orchestrator ran a full DHCP server on a dedicated
br-vetting bridge (10.77.0.0/24), which required a hypervisor-level
bridge + physical cabling onto that bridge for every repaired host.
Real-world bite: the LXC's br-vetting had no L2 path to the target
host's PXE NIC, so DHCPDISCOVERs never reached eth1 and PXE silently
timed out.
dnsmasq's proxy-DHCP mode is the idiomatic answer: it coexists with
the LAN's existing DHCP server (UniFi, etc.), never assigns an IP
itself, and only supplements the PXE options. No dedicated bridge,
no VLAN, no cabling changes \u2014 dnsmasq binds to the LAN interface
and layers option 66/67 + the PXE BINL on top of the real DHCP
exchange. The MAC allowlist still gates replies, so random LAN
clients booting from network get nothing.
Template switches dhcp-range=<start,end,lease> to
dhcp-range=<cidr>,proxy and replaces dhcp-boot= for first-boot ROM
clients with pxe-service= directives (the correct proxy-mode
chainload form). Validation drops the dhcp_range regex for a
net.ParseCIDR check on pxe.subnet. Config, production/example yaml,
and pxe-setup.sh swap --dhcp-range for --subnet.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Previously tftp_root defaulted to logs.dir/../tftp and the pxe
runtime dir to logs.dir/../pxe. On a production install that
resolves to /var/log/tftp and /var/log/pxe, both outside the
systemd unit's ReadWritePaths=/var/lib/vetting /var/log/vetting
sandbox. The service crash-looped with "mkdir /var/log/pxe:
read-only file system" as soon as PXE was enabled.
Switch the anchor to filepath.Dir(cfg.Artifacts.Dir) — typically
/var/lib/vetting — which the sandbox already allows.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Collapses the LXC side of PXE enablement from a six-step manual dance
(build, fetch iPXE, scp, bridge, hand-edit yaml) into:
make release # dev box (Linux/WSL)
scp bundle.tar.gz lxc:/tmp/
sudo ./install.sh # base install, unchanged
sudo ./pxe-setup.sh --interface ... --dhcp-range ... --orchestrator-url ...
pxe-setup.sh fetches iPXE from boot.ipxe.org, verifies against pinned
SHA256s in deploy/ipxe-shas.txt (fail-closed), places vmlinuz/initrd.img
from the bundle, and rewrites only the pxe: block of vetting.yaml.
Idempotent; --force gates overwriting a hand-edited block.
Adds Supervisor.Validate() — called before dnsmasq spawn — so typo'd
configs fail at orchestrator startup with clear errors naming the
missing file or yaml key, instead of silently serving broken TFTP
until a real host tries to PXE-boot. Nine tests cover missing files,
bogus interface, malformed dhcp_range, bad orchestrator_url, and
aggregate reporting.
Hypervisor bridge creation stays documented (LXC can't do it) but
everything downstream of the bridge is now scripted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Pipeline now always renders all 13 nodes (3 pre-stage + 9 stage +
Completed), synthesising ghosts from run state when stage rows
aren't seeded yet. Makes a WaitingWoL host show the full timeline
ahead of it instead of just 4 dots.
Agent tags each log line with its stage; logs.Hub fans out to both
log-{runID} and log-{runID}-{stage} SSE events so the detail page
can show per-stage tabs with a pure-CSS radio-sibling switch. Flat
run log prepends [stage] so grep still works.
Dispatcher writes picked/sent-WoL/heartbeat lines into the per-run
log — the operator opens the detail page, sees WaitingWoL stuck,
and reads exactly what the dispatcher did and why nothing's
progressing, instead of having to tail journalctl on the LXC.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Click a tile to open /hosts/{id} — the canonical control surface per
host. Timeline renders every pre-stage, stage, and terminal node in
order, with the current one pulsing, failed ones flagged, and
downstream ones dimmed as skipped. Detail page shows summary, hold
card (when holding), all action buttons, spec diffs, a full-height
log pane, and a collapsed expected-spec YAML.
Tile slims to name, last-seen, status, and one primary action; a
CSS-overlay <a> makes the whole card clickable while buttons stay
receptive via z-index.
Runner.publishTileUpdate now also emits pipeline-{runID} fragments,
and CompleteStage wraps Stages.CompleteByName so stage completions
advance the timeline live — without this the dots only moved on
state transitions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
vetting-agent gains a `host` subcommand that runs as a systemd service
installed by the quick-register one-liner, POSTing every 30s to
/api/v1/hosts/{mac}/heartbeat so the dashboard tile shows "online" or
"Nm ago" without waiting on WoL. Ships dormant client code for the
Phase 2 reboot_for_vetting command so the server can flip it on later
without a binary redeploy.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Operator pastes `curl -fsSL $ORCH/register/quick.sh | sudo bash` on the
target host (pre-wipe). The script probes MAC + CPU/RAM/disks/NICs/GPUs,
emits an expected-spec YAML, and POSTs to a new LAN-trusted JSON
endpoint /api/v1/hosts. The register page shows the command prefilled
with the orchestrator URL; the manual form moves into a collapsible
"Register manually" disclosure.
Can't log in from a fresh LXC deploy, and the service is LAN-only by
design. Rip out the whole bcrypt-password / signed-cookie session
layer: internal/auth, login templates, gen-admin-password binary +
Makefile targets, auth config block, login/logout routes and the
RequireSession middleware wrap. Agent bearer-token auth on
/api/v1/runs/{id}/* is untouched.
Operators who want a password can front the service with a reverse
proxy — noted in README and docs/operations.md.
josh